400/600/800/1000/1500 VA Uninterruptible Power Supply (UPS)

GE’s VCL Series UPS offers continuity in a compact, lightweight and cost-effective solution. The VCL Series range of Uninterruptible Power Supply (UPS) connects between the mains supply and your critical load to ensure, when the mains power supply drops or fails, your load continues to receive a clean, constant and reliable source of power until a graceful and safe shutdown of the load can be performed. Hardware and data is protected and operations are reliably maintained.

With GE's GT Series, your mission-critical equipment is protected from any fluctuation in your power source, enabling you to concentrate on your core activities. The GT Series is a true VFI (Voltage & Frequency Independent) on-line double conversion, transformerless, intelligent and high performance installable UPS.
This UPS provides critical power protection to suit a wide range of IT Networks, Telecom and other applications. The GT Series is easy to install and service, and is designed for maximum site flexibility. With an attractively designed modern common tower and/or 19inch rack mount cabinet, the UPS can adapt as network configurations adapt.

GE's LP Series provides critical power protection for many applications. The LP Series is easy to install and service, optimised for the office environment. The robust design is also suitable for more traditional, industrial applications.
Both the power and reliability of the system can easily be expanded by adding units, creating a redundant system which has no single points of failure (LP 11/31T Series). This is achieved by ultilising GE´s unique Redundant Parallel Architecture™ (RPA™) technology.

GE's LP 33 Series is a highly reliable transformerless three phase UPS system providing power protection for a wide range of critical applications from medical to datacenters and telecommunication
GE’s clean input Active IGBT rectifier technology provides a high input UPS power factor (0.98) and low input harmonics distortion on the input current. This allows the user to save in the sizing of upfront UPS equipment: generator sets, cabling and circuit breakers, avoiding also any additional reactive power from the utility distribution. The LP 33 Series UPS offers reliability at its best. To further increase system reliability, 2 or more units can be connected in parallel. In this way a redundant fault-tolerant system is created with maximum power availability and reliability. The decentralized bypass offers maximum flexibility to the end-user for future expansion of the system.

With GE's GT Series, your mission-critical equipment is protected from any fluctuation in your power source, enabling you to concentrate on your core activities. The GT Series is a true VFI (Voltage & Frequency Independent) on-line double conversion, transformerless, intelligent and high performance installable UPS.
This UPS provides critical power protection to suit a wide range of IT Networks, Telecom and other applications. The GT Series is easy to install and service, and is designed for maximum site flexibility. With an attractively designed modern common tower and/or 19inch rack mount cabinet, the UPS can adapt as network configurations adapt.

Delivering Best-in-Class Efficiency with Innovative Technology

GE’s TLE Series UPS is one of the most efficient and reliable three-phase UPS systems, providing best-in-class efficiency, output performance and critical power protection for your data center needs. The TLE Series UPS solutions are optimized to provide high efficiency at part load conditions. The TLE Series UPS helps assure low input current harmonic distortion, best-in-class output voltage regulation and dynamic response. This helps customers save operational costs while implementing environmentally friendly solutions.
The TLE Series UPS provides industry-leading reliability, efficiency, clean input performance and unity power factor at output. Reliability can be further increased by paralleling more units utilizing GE’s unique RPA™ (Redundant Parallel Architecture) technology. Through their complete life cycle, all GE UPS systems are fully supported by service teams which provide world-class, 24x7 preventive and corrective services, training and application expertise.

With Ultra-High Efficiency eBoost™ Technology

GE's SG Series is one of the best performing and most reliable three-phase UPS systems providing critical power protection for a wide range of applications. Every SG Series system operates in VFI mode (Voltage Frequency Independent). It was developed using GE’s Design for Six Sigma methodology to ensure that the product fully meets customer requirements and expectations.

GE’s SG Series UPS in the range from 10-500 kVA are available either with traditional thyristor rectifier technology, or with a rectifier based on GE’s cutting edge PurePulse technology. PurePulse is an innovative control algorithm applied on the IGBT rectifier. This current source rectifier assures an Input Total Harmonic Distortion (THDi) of less than 3%, and draws a pure sinusoidal waveform from the mains. PurePulse is a breakthrough innovation from GE.

GE provides a unique technology called Redundant Parallel Architecture™ (RPA™) that can parallel Uninterruptible Power Supply (UPS) modules with true redundancy.

With RPA™, there is no need for external electronics or switches to control the UPS modules in the parallel system. One of the UPS modules in the system arbitrarily takes a leadership role, while the other UPS modules have access to all control parameters. If one UPS fails to operate, the load is automatically redistributed among the others. If the lead UPS fails to operate then a different UPS automatically takes on the leadership role.

Flywheel Overview

The flywheel, using technology, stores kinetic energy in the form of a rotating mass and is designed for hi power, short time discharge applications. The technology includes a high speed motor generator and active magnetic bearings that are used to levitate and sustain the rotor during operation.

The flywheel energy storage system works like a dynamic battery that stores energy by spinning a mass around an axis. Electrical input spins the flywheel hub up to a high speed and a standby charge keeps the unit spinning until its called upon to release its energy. The energy is proportional to its mass and speed squared. Thus, doubling the mass will double the energy capacity, but doubling the rotational speed will quadruple the energy capacity, thus giving our flywheel a competitive advantage.

TLE Modular Overview

The new TLE Series UPS (160 to 1500 kW) is an innovative UPS combining high reliability, high efficiency and high power. The perfect blend of smart software, diagnostics and real-time multi-mode energy savings..

Reliability is inherent in our UPS technology. Our customers want the highest level of reliability so we developed a redundant-parallel system, known as RPA (Redundant Parallel Architecture)..